Taylor® XC-200SL Detalles
PropĆ³sito construido Montacargas para interiores

Capacidad:

20000 lbs / 9072 kg

Centro de carga (mm):

24 in. / 610 mm

Distancia entre ejes (mm):

80.0 in. / 2032 mm

Description:

Taylor Cushion Tire Forklifts are designed for smooth surface applications. Whether in a factory or warehouse environment Taylor Cushion Tire Lift Trucks provide unparalleled performance and maneuverability. The XC-200SL cushion tire forklift is built to meet the needs of the Steel, Aluminum, Automotive and Rigging Industries.

Basic Truck Includes:

  • GM 5.7L-125HP LPG Engine (LPG Tanks Not Included)
  • Remote mounted engine oil filter
  • Dry type Air Cleaner with safety Element and Restriction Indicator
  • Muffler in frame - (LPG engine only)
  • Heavy duty battery
  • 12 Volt electrical system; 105 ampere alternator & Circuit breakers
  • Anti restart ignition system
  • Electric horn 118 DBA
  • Key switch actuated Amber Strobe Lights
  • Reverse actuated Back up alarm
  • Forward actuated forward alarm
  • Electronic Canbus engine (only) diagnostics display
  • Work lights, 2 front and 1 rear
  • Stop, tail lights, turn signals, and reverse lights
  • Powershift Transmission- 3 speed w/ inching, Modulated, & Electric Shift Control
  • Air/Oil Cooling with Automatic Power Shift Control
  • Electric joystick controller for hydraulic controls, right arm rest mounted
  • Bolted planetary drive Axle
  • Oil cooled wet disc brakes, hydraulic actuated with cooler for brake oil and hydraulic oil and accumulators
  • Auxiliary Drive Line Mounted Parking Brake
  • Taylor heavy duty steer axle
  • Hydrostatic power steering
  • Tire: Drive 28" x 12" x 22" black XL Poly Non Marking
  • Tire: Steer 22" x 8" x 16" black XL Poly Non Marking
  • All welded chassis, 56" wide
  • 5# Fire Extinguisher
  • 88-in. Lowered Height Operator overhead guard with overhead opening
  • Tilt Steering
  • Hinged down T-shaped dash
  • Operator fan
  • Two Panoramic Rear View Mirrors
  • Cup Holder
  • Vinyl, air suspension operators seat with orange seat belt and OPS switch, seat has partial rotation 16° left / 24° right
  • 2 Section hydraulic control valve
  • Steering Load sense hydraulics
  • Hydraulic accumulator in lift circuit
  • 2-Stage Telescopic Mast (88-in. Overall Height Lowered)
  • Mast has Two Lift Eyes
  • 53" Wide pin type carriage
  • 2.5" x 7" x 48" pin type forks

DISCLAIMER:

This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.