Taylor® XH-925L Detalles
Propósito construido Montacargas de servicio pesado

Capacidad:

92500 lbs / 41957 kg

Centro de carga (mm):

48 in. / 1219 mm

Distancia entre ejes (mm):

225.0 in. / 5715 mm

Description:

The XH-925L Heavy Duty Forklift tackles the heaviest loads with ease. The Taylor XH-Series 48-in. L.C. lift trucks feature T4 Final diesel engines utilizing 388 HP, heavy duty drive and steer axles, and like all of our other Pneumatic lift trucks, End-User diagnostics that allow you to customize operating parameters and troubleshoot most codes without the need for service calls. Rugged environments with the heaviest loads are where the HD Large Capacity XH-Series thrives. Common applications include, but are not limited to, Steel & Aluminum, Stevedoring, Port Operations, Intermodal, Concrete, Forest Products.

Standard Features: XH-925L

  • 15-ft Direct Lift 2-Stage Mast (276-in lowered height)
  • 120-in Pin-type “C” Carriage
  • 6-in X 12-in X 96-in pin mounted Forks
  • Volvo 12.9L TAD1371VE 388-HP (Turbocharged) Tier 4 Final Diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator(vertical air intake extension)
  • Dana TE-30 5-Speed Powershift Transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-106 planetary Drive Axle with Wet Disc Brakes
  • Taylor 600 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 18.00 X 33 – 40PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Bolted counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and defrost
  • Tinted glass with front and rear windshield wipers and washers
  • Fully adjustable air ride swivel seat
  • Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown(5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) …see next page for additional info
  • 7-in touch screen color display
  • TaylorTrak Pro Advanced Fleet Telematics hardware
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color and number coded.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 110 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • (4) forward facing LED work lights (Cab mounted)
  • (2) rear facing LED work lights (Cab mounted)
  • (2) LED work lights (Mast mounted)
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual trumpet air horns (126 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

Vehicle Information Package

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video

DISCLAIMER:

This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.