Montacargas de centro de carga de 36 pulg / XH-180
Taylor® XH-180
The XH-180 is capable of handling long duty cycles with a lift capacity of 18,000lbs. Taylor 36-in Load Center Pneumatic Tire forklifts are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring. Own a Taylor forklift and you'll never turn back. That's because Taylor Big Red designs, engineers and manufactures the Ultimate Heavy Lift Trucks
Impresión
- Capacidad: 8,165kg / 18000 lbs
- Tonne: 8
- Centro de carga (mm): 914 mm / 36 in.
- Distancia entre ejes (mm): 2641 mm / 104.0 in.
- Motor: QSF3.8-C120 4F
- Transmisión: TC-20 3-sp. APC
- Mástil (mm/Tipo): 3,352 UV
- Carro Att. (Tipo): C-72
- Tenedores (mm): 51mm x 178mm x 1,829mm
- Tipo de freno: Hidráulico
- Voltios: 24
- Neumático: 8.25 X 15 -18PR
Standard Features:
- 11-ft. ULTRA-VU 2-Stage Mast (119-in lowered height)
- 72-in Pin-type "C" Carriage
- 2.75-in X 7-in X 72-in pin mounted Forks
- Cummins QSF 3.8L 120Hp Tier-4 Final Diesel Engine
- Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
- Dana TC-20 3-Speed powershift Transmission
- Powertrain Protection System for engine and transmission
- Kessler D-41 HD planetary Drive Axle with Wet Disc Brakes and Park Brake
- Taylor 125 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- Solid plate steer angle stop (more contact area than bolt heads which require adjustment)
- 8.25 X 15 - 18PR bias pneumatic drive and steer tires
Chassis
- All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
- Bolted counterweight
- Replaceable bolt-on steps and handrails
- Lockable Fuel Cap
- Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.
Cab
- Isolation mounted open operator base with overhead guard and sky-view window (includes single brake pedal, dome light, wide angle mirrors, handrails and black floor mats).
- Adjustable Black Vinyl Covered Mechanical Suspension Seat w/Arm Rests (Seat has +/- 15 degree rotation)
- Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown(5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS) with 7-in touch screen color display
- One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- Color and number coded wiring.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical
- 24-volt electrical system with 70 amp alternator
- Dual heavy-duty batteries
- Battery disconnect/lock-out switch
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type electronics switch with push button start
- Dual electric trumpet horns (116 dBA)
- Keyswitch-actuated amber strobe light
- Forward actuated warning alarm
VIP
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
No hay video disponible en este momento
Taylor International® proporciona Montacargas de servicio pesado ventas, repuestos y servicio para Centro y Sudamérica. Taylor Forklifts y Material Handling Equipment están diseñados, fabricados y fabricados en los Estados Unidos de América. Industrias como el acero, el aluminio, la madera, la madera, el concreto, el prefabricado, el breakbulk, el intermodal, los puertos, los ferrocarriles y los estibadores suelen utilizar productos Taylor®.
Para obtener información sobre cualquiera de los productos que ofrecemos. Por favor contáctenos