Emissions Compliant Diesel Engine (Tier 4 Final or Stage V available)
660V All-electric battery power drivetrain. Two-full shift run time (under normal work cycles)
4.5 hours full charging time with 180 kW external charging equipment
E-Axle with Energy Recovery Technology through regenerative braking
Kessler D-106 planetary drive axle with wet disc brakes
Taylor 600 welded steel steer axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
18.00 X 33 - 36PR bias pneumatic drive and steer tires
Chassis
All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
Bolted Counterweight
Lockable Fuel Cap
Replaceable bolt-on steps and handrails
Side service doors and removable floor panels open to expose drive train for ease of
maintenance.
Cab
Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
Heater and defrost
Tinted glass with front and rear windshield wipers and washers
Fully adjustable air ride swivel seat
Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
Taylor Integrated Control System (TICS)
7-in touch screen color display
TaylorTrak Pro Advanced Fleet Telematics hardware
The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
All wiring is color and number coded.
Dual USB charging ports
Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical (Low Voltage)
24-volt electrical system with 110 amp alternator
Dual heavy-duty batteries
Battery disconnect/lock-out switch
(4) forward facing LED work lights (Cab mounted)
(2) rear facing LED work lights (Cab mounted)
(2) LED work lights (Mast mounted)
Circuit breakers with heavy duty connectors (no automotive type fuses)
Breaker reset switches
Key-type anti-restart ignition switch
Dual trumpet air horns (126 dBA)
Keyswitch-actuated amber strobe light
Forward and reverse-actuated warning alarms
Vehicle Information Package
Operators Guide
Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)