ZH-650L '.$row['model'].'

ZH-650L
Electric Lifts

Load Center48"
Wheelbase180.0"
Capacity65K lbs.
Mast11' UV
CarriageC-120 SS/FP
Forks5x12x96 in
BrakesRegenerative
Volts24
Tires16 X 25 - 28PR
Contact for Quote Forklift Safety Manual

Features

Standard Features

  • 11' ULTRA-VU/XD 2-Stage Mast with side shift (161-in lowered height)
  • 120-in Pin-type ";C"; Carriage with individual fork positioning & side shift
  • 5-in X 12-in X 96-in pin-mounted Forks
  • Permanent Magnet Synchronous Motor
  • 100+/- minutes charging time
  • High voltage electrical system (660 volt)
  • Nickel-Manganese-Cobalt Battery Technology
  • Dana E-axle (144 P453)
  • Energy Recovery Technology (through regenerative braking)
  • Taylor HD-550 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • 16 X 25 - 28PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
  • Bolted Counterweight
  • Lockable Fuel Cap
  • Replaceable bolt-on steps and handrails
  • Hinged engine hood, side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and defrost
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat
  • Multifunction Joystick mounted on adjustable armrest with integrated directional shift control
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5-minute default, password adjustable from 1-120 minutes by end-user)
  • Taylor Integrated Control System (TICS)
  • 7-in touch screen color display
  • TaylorTrak Pro Advanced Fleet Telematics hardware
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color and number-coded.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical (Low Voltage)

  • 24-volt electrical system
  • Dual heavy-duty lead-acid batteries (for system startup)
  • Battery disconnect/lock-out switch
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights (";A"; pillar mounted)
  • (2) LED work lights (mast mounted)
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

Vehicle Information Package

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video