Telescopic Boom for stacking 5-High 1st row, 4-High 2nd row and 3-High 3rd row (9' 6" Loaded)
120,000-lbs capacity first row up to 2-high stacking
Boom lift and extension is limited to 1st Row, 2-High 9.5' containers stacking when lifting greater than 99,000-lbs
20-40 ISO Container Handling Attachment, with rotation, side shift, expansion/retraction and damping
673V All-electric battery power drivetrain. Two-full shift run time (under normal work cycles)
4.1 +/- hours full charging time with 200 kW external charging equipment (10%-100%)
3.8 +/- hours full charging time with 240 kW external charging equipment (10%-100%)
E-axle with Energy Recovery Technology through regenerative braking
Taylor welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
Chassis
All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
Removable deck plates open to expose drive train for ease of maintenance
Cab
Climate Controlled sliding (hydraulic/electric) all-welded steel center mount cab (includes right-hand and left-hand access doors, with rear exit window and dome light)
Heating with front and rear defrosting, cab pressurizer and fresh air intake
Two circulation fans
Exterior Cab Positioning Switch allows the cab to be moved while the machine is powered down
Tinted glass with front, rear, and top windshield wipers
Front and top windshield washer
Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
Multifunction joystick, with integrated directional shift control, mounted on adjustable arm rest
Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
Taylor Integrated Control System (TICS)
TaylorTrak Pro - Advanced Fleet Telematics hardware
7-in touch screen color display
Rear visibility aid camera system
The 2-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
All wiring is color and number coded.
Dual USB charging ports
Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical (Low Voltage)
24-volt electrical system with 110 amp alternator
Dual heavy-duty batteries
Battery disconnect/lock-out switch
2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on boom)
(4) Chassis mounted LED work lights
(4) Boom mounted LED work lights
(2) Dedicated Twistlock LED work lights
(2) LED step lights
Stop-Tail-Turn Lights
Circuit breakers with heavy duty connectors
Breaker reset switches
Air Horn with 2-gal air tank (126 dBA)
Keyswitch-actuated amber strobe light
Forward and reverse-actuated warning alarms
Vehicle Information Package
Operators Guide
Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
