ZRS-9972
Electric Lifts

Telescopic Boom for stacking 5-High 1st row, 4-High 2nd row and 3-High 3rd row (9' 6" Loaded)
20-40 ISO Container Handling Attachment, with rotation, side shift, expansion/retraction and damping
660V All-electric battery power drivetrain. Two-full shift run time (under normal work cycles)
5 hours full charging time with 180 kW external charging equipment
E-axle with Energy Recovery Technology through regenerative braking
Taylor 800 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)

Climate Controlled sliding (hydraulic/electric) all-welded steel center mount cab (includes right-hand and left-hand access doors, with rear exit window and dome light)
66,000 BTU total heating with front and rear defrosting, cab pressurizer and fresh air intake
40,000 BTU air conditioning and two circulation fans
Exterior Cab Positioning Switch allows the cab to be moved while the machine is powered down
Tinted glass with front and rear windshield wipers and front windshield washer
Fully adjustable air ride swivel seat with 35 deg. of rotation (15-20 deg. left-right)
Multifunction joystick mounted on adjustable arm rest
Roll shift directional control (column mounted)
Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
Taylor Integrated Control System (TICS)
7-in touch screen color display
The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
All wiring is color and number coded.
Dual USB charging ports
Hydrostatic, steer-on-demand power steering with tilt steering column

24-volt low voltage electrical system with 110 amp alternator
Dual heavy-duty batteries
Dual Battery disconnect/lock-out switch
2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on container attachment)
(4) forward facing LED work lights (cab mounted)
(2) rear facing LED work lights ("A" pillar mounted)
(2) LED work lights (mast mounted)
(2) LED work lights (twistlock mounted)
(2) LED step lights
24V Low Voltage System with heavy duty connectors
Breaker reset switches
Air Horn with 2-gal air tank (126 dBA)
Key switch-actuated amber strobe light
Forward and reverse-actuated warning alarms

Operators Guide
Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
Safety Check Manual and Video

Quick Links